2.16 Wall Mounting
Getting Started
25
2.16 Wall Mounting
2.16.1 Wall Mounting the VPS
Mounting on a Wooden Wall
1.
Place the appropriate wall mounting template (found on the last 2 pages of this manual) on the
wall to mark the locations where the 3 screws need to be placed.
2.
Install the screws and washers (included) in the wall.
Note
•
Drive the screws into the wall until each screw head is the same distance from the wall.
•
Install the screws perpendicular to the wall.
3.
Mount the unit as shown.
Note
•
Do not block the openings of the unit. Allow space of at least 20 cm above and 10 cm on the
sides of the unit.
•
Make sure that the wall behind the unit is flat and free of obstructions so that the openings
on the back of the unit will not be blocked.
•
Be careful not to drop the unit.
Washer
Drive the screw
to this position.
