background image

Trademarks

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the 
United States and/or other countries.

Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the 
United States and other countries.

All other trademarks identified herein are the property of their respective owners.

Screen shots reprinted with permission from Microsoft Corporation.

Panasonic Communications Co., Ltd. declares that the KX-TVM50E and KX-TVM50NE are in compliance with 
the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment 
(R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this manual are available for 
download by visiting:

http://doc.panasonic.de

Contact:
Panasonic Services Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, F.R. Germany

Panasonic Communications Co., Ltd.

1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan

Copyright:

This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal 
use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic 
Communications Co., Ltd.

© 2005 Panasonic Communications Co., Ltd. All Rights Reserved.

                                                                                                                            PSQX3225ZA

  

KK0205HF0

Содержание KX-TVM50























































Отзывы: