2.16 Wall Mounting
26
Getting Started
Mounting on a Concrete or Mortar Wall
CAUTION
When driving the mounting screws into the wall, be careful to avoid touching any metalwork
(metal/wire laths, etc.), conduits, or electrical cables buried in the wall.
1.
Place the appropriate wall mounting template (found on the last 2 pages of this manual) on the
wall to mark the locations where the 3 screws need to be placed.
2.
Install 3 anchor plugs (user-supplied) in the wall, then install the screws (included) in the wall.
3.
Mount the unit as shown.
Note
•
Do not block the openings of the unit. Allow space of at least 20 cm above and 10 cm on the
sides of the unit.
•
Make sure that the wall behind the unit is flat and free of obstructions so that the openings
on the back of the unit will not be blocked.
•
Be careful not to drop the unit.
Hammer
29 mm
Anchor Plug
6.4 mm
Drive the screw
to this position.
