•
Handover is performed when the RSSI level of the currently connected IP-CS becomes lower than the
other IP-CS’s RSSI level.
•
Make sure to check that there is no noise during handover.
Exiting PS Area Check Mode
When the PS area check is finished, exit the PS area check mode.
1.
Start the PS in Maintenance mode.
2.
Select "PS area check", and then press
.
3.
Select "Off".
4.
Press
.
5.
Press the POWER/CANCEL key until the PS is turned off.
6.
Press the POWER/CANCEL key until the PS is turned on.
7.
Repeat the procedure from
1
to 6 for the other PS.
Installation Guide
73
5 Appendix
