Panasonic HYBRID IP-PBX KX-TDA100 Скачать руководство пользователя страница 74 | Manualshive

Страница: 74 / 364

Panasonic HYBRID IP-PBX KX-TDA100 Скачать руководство пользователя страница 74

1.4 D

74

Feature Manual

[Method Flowchart]

[Programming Example: DIL Table]

The table can be programmed for each CO line.

In this example:

If a CO line call is received on CO line 01:

In day mode: Calling Line Identification (CLI) distribution is enabled. The call is routed to its CLI destination,
if assigned. If not assigned, the call is routed to the Direct In Line (DIL) destination, extension 101.

In lunch mode: CLI distribution is disabled. The call is routed to the DIL destination, extension 100.

Note

Tenant numbers and VPS trunk group numbers (not shown here) can also be programmed in the DIL
Table.

*

:

→

2.16.2 [10-2] DIL Table & Port Settings—DIL—DIL Destination—Day, Lunch, Break, Night

→

[450] DIL 1:1 Destination

A CO line call is received.

Yes

Yes

No

Does the call have

Caller ID information and is CLI

distribution enabled for the CO line in

the current time mode?

No

Has the caller

been stored in the System Speed

Dialing Table and has a CLI destination

been assigned?

The call is routed to the
DIL destination.

The call is routed to its
CLI destination.

The call is routed to an
operator (Intercept
Routing—No Destination).

Yes

Is a DIL destination assigned
for the current time mode?

No

Port No.

(CO Line No.)

01

02

Day

Enable

Enable

Lunch

Disable

Disable

Night

Disable

Disable

Break

Enable

Disable

Day

101

102

Lunch

100

100

Night

100

100

Break

101

102

CLI Distribution

DIL Destination

*

«
...
72
73
74
75
76
...
»

Содержание HYBRID IP-PBX KX-TDA100













































































































































































































































































































































































Отзывы:

Нет отзывов