Panasonic HYBRID IP-PBX KX-TDA100, Руководство по функциям, Страница: 54 / 364

1.3 C
54 Feature Manual
[COLP Example]
CLIP/COLP Number:
The telephone numbers sent to the network for CLIP/COLP can be assigned as follows:
• CLIP/COLP number for each ISDN port (subscriber's number).
• CLIP/COLP number for each extension.
• CLIP/COLP number for each incoming call distribution group.
Each extension can select either the CLIP/COLP number for the ISDN port or the extension to be used. The
CLIP/COLP number for the ICD group is used when making a call by pressing the ICD Group button or
receiving a call which arrives at the ICD Group button.
Calling Line Identification Restriction (CLIR) and Connected Line Identification Restriction (COLR)
It is possible for each extension to prevent the sending of its telephone number to the network by pressing
the CLIR button, COLR button or entering the feature number.
Conditions
• CLIP, COLP, CLIR, and COLR are only available for the KX-TDA100, KX-TDA200, and KX-TDA600.
• The availability of this feature is dependent on the contract with the telephone company.
• The CLIP/COLP number for the connected ISDN port can be used for the ISDN terminal devices which
cannot be assigned their own CLIP/COLP number, such as a doorphone.
• COLP/CLIR/COLR Assignment for Each Port
Each service can be enabled or disabled on each ISDN port of the PBX.
• CLIR Button and COLR Button
It is possible to switch between CLIP and CLIR by pressing the CLIR button, and COLP and COLR by
pressing the COLR button. A flexible button can be customized as the CLIR or COLR button.
• The CLIP/COLP number must match the telephone number provided by the telephone company.
Otherwise it will be ignored or replaced by another number.
• When using a private network, the extension number assigned for each extension through system
programming is sent for CLIP/COLP. (
→
1.13.21 Private Network Features—QSIG—CLIP/COLP
(Calling/Connected Line Identification Presentation) and CNIP/CONP (Calling/Connected Name
Identification Presentation))
Programming References
PC Programming Manual
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
→
CO Setting—Subscriber Number
PBX
ISDN
FWD, IRNA, etc.
1) Dials
" 111222333 ".
2) Answers the call.
3) " 111222444 "
is displayed.
Caller
Called party
(CLIP/COLP No.:
111222333 )
Answering party
(CLIP/COLP No.:
111222444 )