Panasonic HYBRID IP-PBX KX-TDA100, Руководство по функциям, Страница: 42 / 364

1.3 C
42 Feature Manual
– Voice Mail (VM) Transfer button
Programming References
PC Programming Manual
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—Call Monitor
2.8.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—Call Monitor
2.10.1 [4-1-1] Wired Extension—Extension Settings
→
Option 2—Data Mode
→
Option 3—Executive Override Deny
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 3—Executive Override Deny
PT Programming Manual
None
Feature Manual References
1.3.19 COS (Class of Service)
Operating Manual References
1.3.7 Call Monitor
1.3.5 Call Park
Description
An extension user can place a call into a common parking zone of the PBX. The Call Park feature can be
used as a transferring feature; this releases the user from the parked call to perform other operations. A
parked call can be retrieved by any extension user.
Conditions
• Automatic Call Park
It is possible to select an idle parking zone automatically.
• Retry
If the specified parking zone is occupied or there is no vacant zone for Automatic Call Park, the
originator will hear a busy tone. Retrying is possible while hearing a busy tone by selecting another
parking zone or a vacant zone.
• Call Park Recall
If a parked call is not retrieved within a preprogrammed time period, the Call Park Recall tone will be
heard at the Transfer Recall destination assigned to the extension which parked the call. If the
destination is engaged in a call, the Hold Alarm will be heard.
• If a parked CO line call is not retrieved within a preprogrammed time period (Default: 30 minutes), it is
automatically disconnected.
• Call Park Button
Pressing the Call Park button parks or retrieves a call in a preset parking zone.
Any flexible button can be customized as the Call Park button. It shows the current status of the preset
parking zone as follows: