Panasonic HYBRID IP-PBX KX-TDA100, Руководство по функциям, Страница: 337 / 364

1.20 W
Feature Manual 337
Operating Manual References
1.3.13 Call Waiting Tone
1.20.4 Wireless XDP Parallel Mode
Description
A portable station (PS) can be used in parallel with a wired telephone, i.e., a digital proprietary telephone
(DPT), analog proprietary telephone (APT), or single line telephone (SLT), allowing an extension user to
make or receive calls with either the wired telephone or the PS. The PS will use the same extension number
as the wired telephone, and many of the wired telephone's extension settings (Call Forwarding [FWD],
Class of Service [COS], etc.) are also used by the PS.
This mode is similar to XDP Parallel mode used to pair DPTs with SLTs. (
→
1.5.7 Extension Port
Configuration)
In order to use a PS in Wireless XDP Parallel mode, the mode must be turned on using the PS.
[Example of Wireless XDP Parallel Mode, XDP Parallel Mode]
Conditions
• Whether or not a PS is allowed to pair itself with a wired telephone is determined by the COS assigned
to the extension number of the wired telephone.
• Wireless XDP Parallel mode can be turned on or off using the PS only.
• To switch between the wired telephone and the PS during a conversation, simply go off-hook with the
other telephone. Alternatively, to seize a separate line, use another method, such as pressing a CO or
INTERCOM button.
In addition, going off-hook with the other telephone seizes a separate line when the extension is:
a)
Engaged in a conference call. (
→
1.3.16 Conference,
→
1.5.3 Executive Busy Override,
→
1.13.12
Privacy Release)
b)
Screening a call using Live Call Screening (LCS) or when recording a conversation using Two-way
Record. (
→
1.19.4 Voice Mail DPT (Digital) Integration)
PBX
CSIF Card
Extension Card
Extn. 102 Extn. 103
XDP Parallel Mode
Wireless XDP
Parallel Mode
DHLC Card
DPT
Wired Telephone
(APT, DPT, SLT)
PS
Cell Station
Wireless Phone
(or any SLT)