Panasonic HYBRID IP-PBX KX-TDA100 Скачать руководство пользователя страница 198 | Manualshive

Страница: 198 / 364

Panasonic HYBRID IP-PBX KX-TDA100 Скачать руководство пользователя страница 198

1.13 P

198

Feature Manual

[DPT + SLT]

•

When in the parallel mode, XDP mode of the Super Hybrid port should be turned off through system
programming.

•

Whether the SLT rings for incoming calls is programmable.

Ring on:

Both telephones ring when a call is received, except for when the digital proprietary telephone

(DPT) is in Hands-free Answerback mode (

→

1.8.1 Hands-free Answerback) or voice-calling mode

(Alternate Receiving Ring/Voice) (

→

1.9.13 Intercom Call).

Ring off:

Only the DPT rings when a call is received, however, the SLT can be used to answer the call.

•

Both telephones cannot engage in calls simultaneously. If one telephone goes off-hook while the other
is on a call, the call is switched to the telephone that goes off-hook. Note, however, that the call will not
be switched when the telephone is:

a)

Being monitored by another extension. (

→

1.9.13 Intercom Call)

b)

Receiving an Off-hook Call Announcement (OHCA) (

→

1.12.3 OHCA (Off-hook Call

Announcement)) or Whisper OHCA. (

→

1.20.3 Whisper OHCA)

c)

On a conference call (

→

1.3.16 Conference,

→

1.5.3 Executive Busy Override,

→

1.13.12 Privacy

d)

Using Live Call Screening (LCS) or Two-way Record is activated (

→

1.19.4 Voice Mail DPT (Digital)

[DPT + DPT]

•

Available Telephones

KX-T7600 series, except KX-T7640

•

When Digital XDP connection enables the number of DPTs to exceed the maximum capacity that the
PBX supports, the following conditions must be met:

–

KX-TDA50: An MEC card is installed and an additional AC adaptor is connected.

–

KX-TDA100/KX-TDA200: An MEC card and the PSU-M or PSU-L is installed.

–

KX-TDA600: The PSU-L is installed.

•

The following features cannot be used on either the master or slave DPT:

a)

OHCA: A call waiting tone will be heard even if the OHCA feature is set.

b)

USB Module: The DPTs will not function properly if a USB Module is attached to either DPT. Do
not connect a USB Module to either of the DPTs.

Note

To cancel a Digital XDP connection, disconnect the slave DPT from the master, then disconnect the
and reconnect the master DPT to the PBX.

[DPT + DPT + SLT]

•

When an SLT is connected to the slave DPT in parallel mode, the SLT acts as a parallel extension of
the master DPT. If connected in XDP mode, the SLT acts as an independent extension.

Installation Manual References

KX-TDA50

1.4.3 System Capacity

2.5.6 MEC Card (KX-TDA5105)

2.6.2 Parallel Connection of the Extensions

2.6.3 Digital EXtra Device Port (Digital XDP) Connection

KX-TDA100/KX-TDA200

«
...
196
197
198
199
200
...
»

Содержание HYBRID IP-PBX KX-TDA100













































































































































































































































































































































































Отзывы:

Нет отзывов