Panasonic HYBRID IP-PBX KX-TDA100 Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 364

Panasonic HYBRID IP-PBX KX-TDA100 Скачать руководство пользователя страница 101

1.5 E

Feature Manual

101

When the call is answered, if distinctive dial tones are enabled, dial tone 3 is heard, which continues until
the user goes on-hook. If the sensor call is not answered within a specified time, the call will be canceled.
It is possible to set a different ring tone pattern for calls received from each external sensor, to distinguish
between them.

Conditions

•

Hardware Requirement:

KX-TDA50: An external sensor and DPH card

KX-TDA100/KX-TDA200/KX-TDA600: An external sensor, OPB card and EIO card

•

Some devices may be unable to communicate correctly with the PBX. Confirm compatibility with the
manufacturer of a device before installing it.

•

After a sensor has been activated, the PBX will ignore any further alerts from the same sensor for the
duration specified by a timer. This timer can be set separately for each sensor.

•

As long as the previous sensor call is still being performed, any further alerts from the same sensor are
ignored.

•

The assigned sensor name and/or number are shown on the display of PTs and PSs when a sensor
call is received.

•

If the destination of a sensor call has set FWD, the sensor call will be redirected to the FWD destination.
However, if the FWD destination is not supported as the destination of a sensor call (e.g., an outside
party), the call will be received at the original destination. (

→

1.6.6 FWD (Call Forwarding))

•

The following features cannot be used when a sensor call is received:

–

Alternate Receiving—Voice (

→

1.9.13 Intercom Call)

–

Hands-free Answerback (

→

1.8.1 Hands-free Answerback)

–

Consultation Hold/Call Hold (

→

1.3.2 Call Hold)

–

Call Transfer (

→

1.3.8 Call Transfer)

Destination

Availability

Wired Extension (PT/SLT/T1-OPX)

PS

ICD Group

PS Ring Group

Floating Extension no. for SVM

VM Group (DTMF/DPT)

External Pager (TAFAS)

DISA

Analog/ISDN Remote Maintenance

Idle Line Access no. + Phone no.

Trunk Group Access no. + Trunk Group no. + Phone no.

Extension of Another PBX (via TIE Line, Access with PBX Code)

Extension of Another PBX (via TIE Line, Access without PBX Code)

«
...
99
100
101
102
103
...
»

Содержание HYBRID IP-PBX KX-TDA100













































































































































































































































































































































































Отзывы:

Нет отзывов