Panasonic HYBRID IP-PBX KX-TDA100 Скачать руководство пользователя страница 123 | Manualshive

Страница: 123 / 364

Panasonic HYBRID IP-PBX KX-TDA100 Скачать руководство пользователя страница 123

1.6 F

Feature Manual

123

FWD/DND Setting by Fixed FWD/DND button

Pressing the fixed FWD/DND button in idle status allows the extension user to set the following items for
FWD/DND:

•

FWD/DND for CO line calls
The FWD/DND status for CO line calls to that extension can be switched temporarily without
clearing the FWD destination. During setting, the LED of the button shows the current CO line call
FWD/DND status. The forwarding type and destination for CO line calls can also be set.

•

FWD/DND for intercom calls
The FWD/DND status for intercom calls to that extension can be switched temporarily without
clearing the FWD destination. During setting, the LED of the button shows the current intercom call
FWD/DND status. The forwarding type and destination for intercom calls can also be set.

•

FWD—No Answer timer
The length of time until unanswered calls are forwarded can be modified. This setting is applied to
both intercom and CO line call forwarding.

•

FWD for Virtual PS
If the extension is the first registered extension in an Incoming Call Distribution Group, the
extension user can set the FWD destination and forwarding status (on/off) for up to 4 virtual PSs
preregistered to the group. (

→

1.19.2 Virtual PS)

These settings are only available when FWD/DND buttons are set through system programming to FWD/
DND Setting mode.

Conditions

•

When FWD/DND buttons are set to FWD/DND Cycle Switch mode, pressing the FWD/DND button
cycles the FWD/DND setting.
In this mode, when intercom calls are set to be handled differently from CO line calls (forwarding type,
forward destination, DND on/off):

a)

in idle mode, the light patterns of the FWD/DND—Both button (including FWD/DND button [fixed
button]) and the Group FWD—Both button will indicate the setting for either CO line calls or
intercom calls, but not both.

b)

the FWD and DND icons on a PS display reflect the settings for CO line calls only.

c)

pressing the FWD/DND—Both button (including FWD/DND button [fixed button]) or the Group
FWD—Both button will be ignored.

•

When both the FWD and DND features are assigned simultaneously, pressing the button changes the
settings as follows:

•

A FWD/DND button customized on a flexible button is always in FWD/DND Cycle Switch mode, and
the mode cannot be changed.

Programming References

PC Programming Manual

2.8.8 [2-6-1] Numbering Plan—Main—Features

→

FWD/DND Set / Cancel: Call from CO & Extension

→

FWD/DND Set / Cancel: Call from CO

→

FWD/DND Set / Cancel: Call from Extension

→

Group FWD Set / Cancel: Call from CO & Extension

→

Group FWD Set / Cancel: Call from CO

FWD

DND

Off

«
...
121
122
123
124
125
...
»

Содержание HYBRID IP-PBX KX-TDA100













































































































































































































































































































































































Отзывы:

Нет отзывов