Panasonic HYBRID IP-PBX KX-TDA100, Руководство по функциям, Страница: 260 / 364

1.13 P
260 Feature Manual
Handover
If a PS is within range of more than one CS, the PS will communicate with the CS which has the
greatest signal strength and an available channel. When a PS user moves out of range of one CS and
moves in range of another CS, the PS will "hand over" its communications to the new CS. Handover is
possible when:
a)
The PS is on an intercom call or on a call with an outside party. (The call will not be disconnected
during the handover.)
b)
A call is ringing at the PS. (The call will continue to ring after the handover.)
c)
The PS is in idle status (i.e., waiting to receive calls).
[Example of Handover]
Handover is not possible when the PS is:
a)
Not within range of another CS.
b)
Within range of another CS but that CS is busy.
c)
Screening a call via Live Call Screening (LCS) or recording a call via Two-way Record (
→
1.19.4
Voice Mail DPT (Digital) Integration)
d)
Paging other extensions. (
→
1.13.1 Paging)
e)
On a doorphone call.
f)
Dialing digits to make a CO line call.
g)
On a call with an extension which is recording the conversation via PC Console or PC Phone.
Conditions
[General]
• If every CS that a PS is in range of is busy when that PS is called, the call will not be connected and
the caller will hear a busy tone.
• A PS can only be assigned an extension number of 4 digits or less.
[KX-TDA600]
• When an EMEC card is installed, the total number of PSs that the PBX supports will increase.
Installation Manual References
KX-TDA50
2.7 Connection of 2.4 GHz Portable Stations
KX-TDA100/KX-TDA200
Call is not disconnected
Handover
CS-2 CS-1 CS-2 CS-1
Moving