Panasonic EverVolt Standard EVAC-105-4, Руководство по установке

Страница: 8 / 76

8 Installation Manual
WARNING: Only an authorized technician should attempt to
service the EverVolt.
WARNING: Risk of injury and equipment damage. Protect the
EverVolt from damage and improper use.
WARNING - ARC FLASH AND SHOCK HAZARD: Appropriate
PPE and Tools Required while working on this energized
equipment.
INVERTER WARNINGS: Method of active anti-islanding
protection: The Inverter monitors for sudden changes in the
impedance of the grid by looking for changes in the second to
the eighth harmonic.
Perform installation and wiring in accordance with all
applicable local electrical codes and standards.
Protection against lightning and resulting voltage surge must
be in accordance with local standards.
Using unapproved attachments or accessories could result in
damage or injury.
Use Class 1 wiring methods for field wiring connections to
terminals of a Class 2 circuit. Use only 6-8 AWG (2.5mm
2
to 4mm
2
) and 1/0 wire in the junction box terminal block.
Select the wire size based on the protection provided by the
circuit breakers / fuses. Install properly rated over-current
protection as part of the system installation.
To ensure optimal reliab i lity and to meet warranty
requirements, the Inverter must be installed and/or stored
according to the instructions in this guide.
Important Safety Warnings
Hazardous Waste:
In the event that the Inverter or one or more batteries of EverVolt is
defective and needs to be removed, replaced, temporarily uninstalled,
disposed of, decommissioned or if Panasonic Customer Support
authorizes a replacement (RMA), perform the following steps:
1. Follow installation and service shut down.
2. Contact Panasonic at panasonicbatterystorage@us.panasonic.com