Editing video
SQT0136
42
Deleting/Editing recorded titles
To cancel a “Now” conversion
Press and hold [RETURN
] for more than
3 seconds.
To confirm whether the conversion is
completed
Press [DIRECT NAVIGATOR].
e.g.,
When “
±±
>
±±
(Recording mode for
conversion)” is displayed, the conversion has not
finished.
To cancel a “During standby” conversion
After performing steps 1–3 (
>
40, Editing)
1 Select “File Conversion” in “Edit”, then press
[OK].
2 Select “Yes”, then press [OK].
• To use “File Conversion”, the HDD needs enough storage
capacity.
• The size of converted title might increase depending on the
title.
• File Conversion is stopped when this unit is turned on
during performing “During standby” conversion. Conversion
will start from the beginning again once the unit is switched
to standby mode.
• When converted, the audio content will be selected
according to the following settings:
- Audio Type for Digital Broadcast (
>
64, 69)
- Audio for HG / HX / HE / HL / HM Recording (
>
64, 69)
• When converted, 3D information may not be retained.
• In titles with the Auto Renewal Recording function (
>
30)
set, a programme may be unintentionally converted while in
“During standby”.
1
Select “Chapter View”, then press [OK].
2
Perform the editing operations.
Edit Chapter Mark:
Select the point where you want to start a new
chapter while viewing the title.
1 Press the green button.
2 Press [OK] at the point you want to divide.
• Repeat this step.
3 Press [RETURN
] to go to Chapter View
screen.
To delete the chapter:
1 Select the chapter, then press [DEL].
Multiple editing
Select the chapter, then press the yellow
button.
A check mark is displayed. Repeat this
step.
• Press the yellow button again to cancel.
2 Select “Delete”, then press [OK].
To combine chapters (Delete chapter
mark):
1 Select the chapter, then press [OPTION].
2 Select “Combine Chapters”, then press
[OK].
3 Select “Combine”, then press [OK].
The selected chapter is combined to the
next chapter.
Playback from Chapter View
Refer to “Playback from Chapter View”. (
>
34)
• The maximum number of chapters:
(Depends on the state of recording.)
Approx. 1000 per title
• When the title has the maximum number of chapters, you
cannot perform the Resume play function (
>
33).
4 “Now” conversion:
Select “Start”, then press [OK].
“During standby” conversion:
Press [OK].
• Conversion will be performed after the unit is
switched to standby mode.
“COPY” or “CONV” on the unit’s display
remains lighted during conversion.
Start Time
Prog.Type:
Rec time
Channel
Date
Title Name
Titles
Movies
9:00 AM
1:00(DR HL)
Editing chapters
DMRPWT540GL_eng.book 42 ページ ２０１４年２月６日 木曜日 午前１１時２８分
