Getting started
SQT0136
14
Connection
3D programmes can be played back when this unit is connected to a 3D compatible TV.
• Before connection, turn off all equipment and read the appropriate operating instructions.
To connect and register the USB HDD (optional)
Refer to “Registering the external HDD (USB HDD)”. (
>
59)
About HDMI cable
If you use an optional HDMI cable, use the High Speed HDMI cables. Non-HDMI-compliant cables
cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable.
When outputting 1080p signal or 24p (4K) signal, please use HDMI Cables 5.0 meters or less.
• This unit cannot connect the TV that does not have the HDMI terminal.
• Keep the RF coaxial cables as far away as possible from other cables.
• The HDMI connection supports VIERA Link “HDAVI Control” (
>
61).
• You cannot connect this unit to DVI devices that are incompatible with HDCP.
Depending on the device, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio
cannot be output.)
• If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down
mixed and output as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)
Basic connections
HDMI
VHF/UHF
RF IN
TV’s rear panel
This unit’s rear panel
Household mains socket
(AC 220 to 240 V, 50 Hz)
Cooling fan
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
HDMI cable
(supplied)
To the aerial
Aerial cable
RF coaxial cable
(supplied)
DMRPWT540GL_eng.book 14 ページ ２０１４年２月６日 木曜日 午前１１時２８分
