Panasonic DLP PT-FRZ50, Инструкция по эксплуатации (Функциональное руководство)

Страница: 112 / 189

Chapter 4 Settings — [PROJECTOR SETUP] menu
112 - ENGLISH
3) Press the <ENTER> button.
f
The
[HDMI CEC]
screen is displayed.
4) Press
as
to select [DEVICE
->
PROJECTOR].
5) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DISABLE]
Disables the link control from the CEC-compatible device to the projector.
Select this when you do not want the power status of the projector to link with the power status of the CEC-
compatible device.
[POWER ON]
Enables power-on link control.
When the CEC-compatible device connected to the <HDMI 1 IN> terminal or <HDMI 2 IN> terminal is turned
on, the projector turns on and starts projection, and switches to the input that the linked CEC-compatible
device is connected.
Power-off link control is disabled.
[POWER ON/OFF]
Enables power-on link control and power-off link control.
When the CEC-compatible device connected to the <HDMI 1 IN> terminal or <HDMI 2 IN> terminal is turned
on, the projector turns on and starts projection, and switches to the input that the linked CEC-compatible
device is connected.
When the CEC-compatible device connected to the selected input is turned off, the projector enters standby
mode.
Note
f
If the CEC-compatible device does not support CEC 1.4, it may not support the link control described in the manual.
[INITIALIZE]
Return various setting values to their factory default settings.
1) Press
as
to select [INITIALIZE].
2) Press the <ENTER> button.
f
The [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the <ENTER> button.
f
The [INITIALIZE] screen is displayed.
4) Press
as
to select an item to initialize.
[ALL USER DATA]
Returns all setting values including [REGISTERED SIGNAL], [NETWORK/E-MAIL], and [LOGO
IMAGE] to the factory default settings.
The projector enters the standby mode to reflect the setting values.
[REGISTERED SIGNAL]
Deletes all the setting values saved for each input signal.
To delete only a part of a registered signal, perform the procedure described in “Deleting the
registered signal” (
x
page 114).
[NETWORK/E-MAIL]
Returns all the setting items under the [NETWORK] menu and all the setting items under the
operation page in the [Detailed set up] page and the Crestron Connected of the web control screen to
the factory default settings.
f
The items of [Time Zone], [Date], and [Time] in the [Adjust clock] page of the web control screen do
not return to the factory default settings.
[LOGO IMAGE] Deletes the image registered in [USER LOGO].
5) Press the <ENTER> button.
6)
When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
Note
f
The security password is the password set in the [SECURITY] menu → [SECURITY PASSWORD CHANGE]. Initial password as the factory
default:
awsqawsq
f
The following settings are not initialized even if [ALL USER DATA] is executed.
g
The [DISPLAY OPTION] menu
→
[UNIFORMITY]
g
The [PROJECTOR SETUP] menu
→
[ECO MANAGEMENT]
→
[STANDBY MODE]
f
If [ALL USER DATA] is executed, the [INITIAL SETTING] screen and the [ADMINISTRATOR ACCOUNT] screen are displayed when the
projection is started the next time.
f
If [NETWORK/E-MAIL] is executed, the [ADMINISTRATOR ACCOUNT] screen is displayed when the projection is started the next time.
[SERVICE PASSWORD]
This function is used by a service person.