Panasonic DLP PT-FRZ50, Инструкция по эксплуатации (Функциональное руководство)

Страница: 107 / 189

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 107
2) Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3) Press
as
to select [IN SHUTTER].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
No audio is output while using the shutter function (shutter: closed).
[ON] Audio is output while using the shutter function (shutter: closed).
Setting mute mode
1) Press
as
to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3) Press
as
to select [MUTE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Audio is output.
[ON] No audio is output.
Setting audio input from a connected device
1) Press
as
to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3) Press
as
to select item to set in [AUDIO IN SELECT].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUDIO IN 1]
Audio connected to the <AUDIO IN 1> terminal is output during projection of image from the set input
terminal.
[AUDIO IN 2]
Audio connected to the <AUDIO IN 2> terminal is output during projection of image from the set input
terminal.
[AUDIO IN 3]
Audio connected to the <AUDIO IN 3> terminal is output during projection of image from the set input
terminal.
[HDMI1 AUDIO IN]
*1
Audio input to HDMI1 is output.
[HDMI2 AUDIO IN]
*2 Audio input to HDMI2 is output.
[DIGITAL LINK AUDIO IN]
*3
Audio input to DIGITAL LINK is output.
*1 Only when the input signal is HDMI1
*2 Only when the input signal is HDMI2
*3 Only when the input signal is DIGITAL LINK
[DC OUT]
Set the power supply function of the <DC OUT> terminal.
1) Press
as
to select [DC OUT].
2) Press
qw
to select an item.
[ON]
Enables the power supply function. Power is supplied to the external device connected to the <DC
OUT> terminal.
[OFF]
Disables the power supply function. The power is not supplied even if an external device is connected
to the <DC OUT> terminal.