Panasonic DLP PT-FRZ50 Скачать руководство пользователя страница 14

Страница: 14 / 189

14 - ENGLISH

Trademarks

SOLID SHINE is a trademark of Panasonic Corporation.

DLP and the DLP logo are registered trademarks or trademarks of Texas Instruments.

Windows, Internet Explorer, and Microsoft Edge are registered trademarks or trademarks of Microsoft

Corporation in the United States and other countries.

Mac, macOS, and Safari are trademarks of Apple Inc., registered in the United States and other countries.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Android and Google Chrome are trademarks of Google LLC.

Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other

countries and areas.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Crestron Connected, the Crestron Connected logo, Crestron Fusion, Crestron RoomView, and RoomView are

trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.

HDBaseT

is a trademark of HDBaseT Alliance.

Art-Net

Adobe, Acrobat, Flash Player, and Reader are either registered trademarks or trademarks of Adobe Systems

Incorporated in the United States and/or other countries.

Some of the fonts used in the on-screen menu are Ricoh bitmap fonts, which are manufactured and sold by

Ricoh Company, Ltd.

All other names, company names, and product names mentioned in this manual are trademarks or registered

trademarks of their respective owners.

Please note that the

and

symbols are not specified in this manual.

Illustrations in this manual

Illustrations of the projector, menu screen (OSD), and other parts may vary from the actual product.

Illustrations displayed on the computer screen may differ depending on the computer type and its operating

system.

Illustrations of the projector with the power cord attached are only examples. The shape of the supplied power

cords varies depending on the country where you purchased the product.

Reference pages

Reference pages in this manual are indicated as (

page 00).

Term

In this manual, the “Wireless remote control unit” accessory is referred to as “Remote control”.

Содержание DLP PT-FRZ50






























































































































































































Результаты поиска

Содержание DLP PT-FRZ50

Отзывы:

Бренды по названию

Популярные бренды

Panasonic DLP PT-FRZ50, Инструкция по эксплуатации (Функциональное руководство)

Результаты поиска

Содержание DLP PT-FRZ50

Отзывы:

Бренды по названию

Популярные бренды