Panasonic DLP PT-FRZ50, Инструкция по эксплуатации (Функциональное руководство)

Страница: 122 / 189

Chapter 4 Settings — [NETWORK] menu
122 - ENGLISH
[OFF]
Select this item when connecting the optional DIGITAL LINK output supported device (Model No.:
ET-YFB100G, ET-YFB200G) to the <DIGITAL LINK/LAN> terminal.
[ON]
Select this item when connecting the “XTP transmitter” of Extron Electronics to the <DIGITAL LINK/
LAN> terminal.
Note
f
For details of the “XTP transmitter”, visit the website of Extron Electronics.
URL http://www.extron.com/
[WIRED LAN]
Perform the connection setting to use the wired LAN.
1) Press
as
to select [WIRED LAN].
2) Press the <ENTER> button.
f
The [WIRED LAN] screen is displayed.
3) Press
as
to select an item, and change the settings according to the operation instructions of the
menu.
[DHCP]
[ON]
If a DHCP server exists in the network where the projector is to be
connected, obtains the IP address automatically.
[OFF]
If a DHCP server does not exist in the network where the projector
is to be connected, set [IP ADDRESS], [SUBNET MASK], and
[DEFAULT GATEWAY].
[IP ADDRESS] Enter the IP address when a DHCP server is not used.
[SUBNET MASK] Enter the subnet mask when a DHCP server is not used.
[DEFAULT GATEWAY] Enter the default gateway address when a DHCP server is not used.
4) Press
as
to select [STORE], and press the <ENTER> button.
f
The confirmation screen is displayed.
5) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
When using a DHCP server, confirm that the DHCP server is running.
f
Consult your network administrator regarding the IP address, subnet mask, and default gateway.
f
The network setting is common for the <LAN> terminal and the <DIGITAL LINK/LAN> terminal.
f
[WIRED LAN] cannot be selected when the [NETWORK] menu
→
[Art-Net]
→
[Art-Net SETUP] is set to [ON(2.X.X.X)] or [ON(10.X.X.X)].
[PROJECTOR NAME]
Change the projector name. Enter the host name if it is required to use a DHCP server.
1) Press
as
to select [PROJECTOR NAME].
2) Press the <ENTER> button.
f
The [PROJECTOR NAME CHANGE] screen is displayed.
3) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
f
Up to 12 characters can be entered.
4) After entering the projector name, press
asqw
to select [OK], and press the <ENTER> button.
f
To cancel, select [CANCEL].
Note
f
The factory default setting of the projector name is “NAMExxxx”. xxxx is the four digit number assigned for each product.
[NETWORK STATUS]
Display the status of the projector network.
1) Press
as
to select [NETWORK STATUS].
2) Press the <ENTER> button.
f
The
[NETWORK STATUS]
screen is displayed.