Panasonic CZ-256ESMC2, Руководство по эксплуатации

Страница: 76 / 104

74
6 Using the System
While this message is visible, no other operations can be performed except OK and Cancel .
Touch OK to perform cut-off processing with the system in the state before the change.
Touch Cancel if you do not need to perform cut-off processing.
Touch OK to check the new con fi guration.
If you select OK here, the current system con fi guration is
re-checked and the results are con fi rmed.
If you do not need to do this, select Cancel .
If the system has changed because of a mistake, return the system to its former state and then
touch Cancel . You should also touch Cancel here if you mistakenly selected Cancel in the
previous message, even though the system cut-off processing should have been done. This
returns you to the
fi rst alarm message, where you can perform cut-off processing.
While this message is visible, no other operations can be performed except OK and Cancel .
6.9 System Con fi guration Changes
An alarm message like the following appears when a system con fi guration change (or the
possibility of a con fi guration change) is detected.
If the system continues to operate after its con fi guration has changed, distribution ratios and other
data will be totally inaccurate. For this reason, cut-off processing must be done with the system
in the state before the change. The following message is displayed to ask you to con
fi rm the
processing.
Operation procedure for each case is as follows.
6.9.1 When a system con fi guration change detected
This alarm message is displayed in cases such as the following.
1
“Check system Con fi guration” was made after removing
the outdoor and indoor units.
2
“Check system Con fi guration” was made after starting the
unit and found that it was different from the previous one
in con
fi guration.
* “Con fi guration” includes not only the number of units and
address but also indoor unit capacity, main/sub unit setting,
and presence/absence of an electric heater.
Here you can see the link system where the con fi guration has
been changed.
CZ-256ESMC2_EN.indb 74 CZ-256ESMC2_EN.indb 74 9/14/2011 3:17:14 PM 9/14/2011 3:17:14 PM