Panasonic CZ-256ESMC2, Руководство по эксплуатации

Страница: 69 / 104

67
6 Using the System
6.8.9.6 LCD auto off settings
6
The auto display off settings allow you to select a time after which the LCD display should be
automatically turned off if there is no activity. The LCD display is turned on again when you
touch it.
Settings: 5 minutes, 10 minutes, 15 minutes, 30 minutes, OFF (default: 30 minutes)
Turning the LCD display off when it is not in use saves power and can prolong the life of the
display and backlight.
6.8.9.7 Calibrating touch panels
Humidity and temperature around the Intelligent Controller and its secular change may affect the
point on the touch panel screen to deviate after use over a long period of time. In such a case,
Calibrate the position.
7
Press Calibration and the next screen will be displayed.
Now press Yes and a cross mark will appear in the center of the screen.
Keep pressing the center with a touch pen for a second or longer and stop pressing. Follow the
same procedure of Upper left  Lower left  Lower right  Upper right.
Start
End
Finally the cross mark disappear and “New calibration settings have been measured.” will be
displayed. Then press somewhere on the screen and the result of calibration will become
effective to restore the original screen.
When 30 seconds passes without operating the screen, the calibration result is cancelled to
restore the previous screen.
Main Sub
6
6
9
9
CZ-256ESMC2_EN.indb 67 CZ-256ESMC2_EN.indb 67 9/14/2011 3:17:11 PM 9/14/2011 3:17:11 PM