Panasonic CZ-256ESMC2, Руководство по эксплуатации

Страница: 49 / 104

47
6 Using the System
6.6.2 Displaying distribution ratios and energy usage by tenant
Use this screen to check the distribution ratios and energy usage by tenant.
Procedure
Select 3.Distrib. ratio/Usage in the main menu and 2.Each tenant in the sub menu.
*When “No Distrib.” is selected, this screen is not accessible. (see
Main Sub
1
1
5
5
)
1
Selects the distribution group to display.
2
Selects either the current or the past (maximum 24 months) cut-off data.
3
Selects the time zone to display.
4
Switches the gas distribution ratio and gas usage display between values for air conditioning
and values for power generation.
When “Gas usage” is displayed: Gas distribution ratios and usage for air conditioning are
shown.
When “Gas use/PwrGen” is displayed: Gas distribution ratios and usage for power generation
are shown.
For air conditioning units without a power generation feature, “ – ” appears under gas usage for
power generation and gas distribution ratio.
3
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
1.Each I/D unit
2.Each tenant
1.All hours
2.Regular hours
3.Out of hours
4.Special Day
1 2 4
•
If the product type is HOT Multi, unit amount will be displayed in m
3
or liters.
•
If no pulse meter is connected, power usage and gas usage are not displayed.
•
Gas usage and distribution ratios are not displayed for PAC units.
Main Sub
2
2
3
3
CZ-256ESMC2_EN.indb 47 CZ-256ESMC2_EN.indb 47 9/14/2011 3:16:59 PM 9/14/2011 3:16:59 PM