Panasonic CZ-256ESMC2, Руководство по эксплуатации

Страница: 30 / 104

28
6 Using the System
Main Sub
4
4
5
5
6.3.5 Making pulse meter settings
If you have connected pulse meters, use this screen to set the target distribution groups and the
amount of electricity or gas per pulse.
Procedure
Select 5. Initial settings in the main menu, and 4. Pulse meter setting in the sub menu.
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
1.Date/Distrib.
2.CNTR/Unit/Ten. No.
3.Ten. name/Distrib. Gr.
4.Pulse meter setting
5.Clear accum. data
1
Select the pulse meter connection destination.
2
You can change the type of pulse meter (power meter or gas meter). The above indicates the
factory default state. When you touch the Meter type area, the Meter type window appears so
that you can select the type of pulse meter to use.
3
Touch a distribution group number. A numeric keypad appears for the distribution group. Use
the keyboard to enter the distribution group number.
* The distribution group number range is from 1 to 8.
* The distribution group buttons are disabled when you have chosen not to perform distribution rate
calculations (see
Main Sub
1
1
5
5
).
4
Touch the pulse unit amount column and enter the amount of electricity (kWh) or gas (m
3
) per
pulse.
5
If the product type is HOT Multi, select the unit for fuel metering.
CZ-256ESMC2_EN.indb 28 CZ-256ESMC2_EN.indb 28 9/14/2011 3:16:47 PM 9/14/2011 3:16:47 PM