Panasonic CS-MRE7PKE, Руководство по обслуживанию

Страница: 40 / 110

40
13.4.2 Horizontal Airflow
š
The horizontal airflow direction louvers can be adjusted manually by hand.
13.5 Timer Control
13.5.1 ON Timer Control
š
ON timer can be set using remote control, the unit with timer set will start operate earlier than the setting time.
This is to provide a comfortable environment when reaching the set ON time.
š
60 minutes before the set time, indoor (at fan speed of Lo-) and outdoor fan motor start operate for 30 seconds to
determine the indoor intake air temperature and outdoor air temperature in order to judge the operation starting
time.
š
From the above judgment, the decided operation will start operate earlier than the set time as shown below.
13.5.2 OFF Timer Control
OFF timer can be set using remote control, the unit with timer set will stop operate at set time.
13.6 Auto Restart Control
š
When the power supply is cut off during the operation of air conditioner, the compressor will re-operate between
three to four minutes (10 patterns to be selected randomly) after power resume.
š
During multi split connection, Indoor unit will resume previous mode, include unit standby mode.
13.7 Indication Panel
LED POWER TIMER
Color Green Orange
Light ON Operation ON Timer Setting ON
Light OFF Operation OFF Timer Setting OFF
Note:
š
If POWER LED is blinking (0.5 seconds ON, 0.5 second OFF), the possible operation of the unit are during
Indoor Residual Heat Removal, Hot Start, during Deice operation, operation mode judgment, or ON timer
sampling.
š
If POWER LED is blinking (2.5 seconds ON, 0.5 second OFF), the unit is in standby mode.
š
If TIMER LED is blinking, there is an abnormality operation occurs.