background image

Information on hazardous constituents as specified in sub-rule1 of rule16 (1) in electrical and electronic 

equipment.

Declaration of Conformity with the requirements of the E-Waste (Management) Amendment Rules, 2023 

with the rule 16 (1) limits with respect to Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated 

biphenyls, Polybrominated diphenyl ethers.
The content of hazardous substance with the exemption of the applications listed in SCHEDULE II of the 

E-Waste (Management) Amendment Rules, 2023 :

1. Lead (Pb) – not over 0.1% by weight;

2. Cadmium (Cd) – not over 0.01% by weight;

3. Mercury (Hg) – not over 0.1% by weight;

4. Hexavalent chromium (Cr6+) – not over 0.1% by weight;

5. Polybrominated biphenyls (PBBs) – not over 0.1% by weight;

6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1% by weight.

For the purpose of recycling to facilitate effective utilization of resources, 

please return this product to a nearby authorized collection center, 

registered dismantler of recycler, or Panasonic service center when 

disposing of this product.

Customer care number ( Toll free ) :   1800 103 1333 ,1800 108 1333
Please see the Panasonic website for further information on collection centers, etc.

or call the customer care toll-free number

http://www.panasonic.com/in/corporate/sustainability/panasonic-india-i-recycle-program.html

S.No.

1.

All electrical and electronic products are required 

to be handed over only to the Authorized 

recycler.

2.

The product should be handed over only to 

authorized recycler for disposal.

3.

4.

5.

6.

Keep the product in isolated area, after it 

becomes non-functional / un-repairable so as to 

prevent its accidental breakage. 
Refer to operating instruction for handling of 

End-of Life products.

Always dispose products that have reached 

end-of life at Panasonic India Authorized Service 

Centre.

Wherever possible or as instructed, separate the 

packaging material according to responsible 

waste disposal options and sorting for recycling.

The product is not meant for re-sale to any 

unauthorized agencies / scrap dealer / kabari-

walas.
The product is not meant for mixing into house-

hold waste stream.

Do not keep any replaced spare part(s) from the 

product in exposed area.
Do not donate old electronic items to any body. 

Do not dispose your product in garbage bins 

along with municipal waste that ultimately 

reaches landfill.

Do not give e-waste to informal and unorganized 

sectors like Local Scrap Dealer / Rag Pickers.

The product should not be opened by the User 

himself / herself, but only by authorized service 

personnel.

Do's

Don't

Do’s & Don’t: E-Waste (Management ) Amendment Rules, 2023

ACXF55-36131-AF

FT1022-0

© Panasonic Corporation 2022

Website: http://www.panasonic.com

Содержание CS/CU-KU12ZKY Series

































Отзывы: