Panasonic CS/CU-KU12ZKY Series, Руководство по эксплуатации и установке

Страница: 11 / 32

SLEEP, TIMER etc. functions will not resume after
power failure.
• In TIMER set conditions if there is power reset then
unit will start in stand by mode.
TIMER
OFF ON CANCEL
1 2
• To cancel ON or OFF timer, press .
• If timer is cancelled manually or due to power
failure, you can restore the timer again by
pressing or then wait for “3” seconds.
• The nearest timer setting will be displayed and
will activate in sequence.
• When ON Timer is set, the unit may start
earlier (up to “15” minutes) before the actual
set time in order to achieve the desired
temperature on time.
ON OFF
CANCEL
11
Select ON or OFF
timer
Set the time
Confirm
Example:
OFF at 14:00
Press the OFF
button.
OFF
OFF OFF OFF OFF
•
Wait for “3” seconds to set timer. •
Press OFF button again to
increase timer time in step
of “10” minutes.
•
or
‘CL’ will be displayed on unit and remote controller.
(’CL’ on unit display is not applicable for LU Models)
While ‘CL’ is displayed, all other functions of the
remote controller will be disabled, except for
ON/OFF button.
Applicable for 10 to 15 minutes.
This feature can only be used in OFF condition.
CLEAN
To clean dust on Evap. Coil of
the Air-Conditioner Unit
This operation is to achieve faster cooling for
1 hour in COOL mode only.
•
POWERFUL
(Low) (Quiet) (Medium) (High)
AUTO
FAN
(Vertical)
(Horizontal)
AIR SWING
To adjust airflow direction
• Keeps the room ventilated.
• If AUTO air swing is set, the flaps swings
left/right and up/down automatically.
• The horizontal and vertical flap are fixed at the
predetermined position.
• Do not adjust the flaps by hand.
Operation conditions
Use this air conditioner under the following
temperature range.
DBT : Dry bulb temperature
WBT : Wet bulb temperature
52 30