9
Using the Touch Pad
z
Initial scope
3
Click [OK].
Using the Virtual Scrolling Function
Set the Virtual Scrolling function using the following procedure. The Touch Pad utility will be disabled.
1
Click
on the notification area, and click [Settings].
When
is not displayed:
, step
1
-
A
2
Remove a check mark from [Use Touch Pad function] in [General settings], and then click
[OK].
3
Click (Start) - [Control Panel] - [Mouse] - [Device Settings].
4
Click the device name (e.g., Synaptics TouchPad) in [Devices], then click [Settings].
5
Click [Virtual Scrolling], add a check mark for the scroll functions you want to use, then
click [OK].
6
Click [OK] at [Mouse Properties].
A. Width of the initial
scope
By dragging the inner circumference of the starting area,
you can change the width of the initial scope (A) in five
stages.
You can also change the width by sliding the [Initial
scope] slide bar.
B. Vertical and
horizontal scroll
initial scope
You can change the initial scope (B) by dragging border
of the vertical and horizontal scroll initial scope. The
maximum starting area for the horizontal scroll is half
the circumference.
