Panasonic AK-UB300G, Руководство по эксплуатации

Страница: 54 / 110

– 54 –
Chapter 4 Menu Operations — Menu list
[DOWNCON DETAIL SETTING]
This item is not displayed in the HD mode.
Item Description of settings
[DETAIL] Enables/disables all detail functions.
[OFF], [ON]
f
Factory setting: [ON]
[MASTER DETAIL] Sets the master detail.
[ − 31] - [ + 31]
f
Factory setting: [0]
[H DETAIL LEVEL] Sets the correction level of the horizontal detail.
[00] - [63]
f
Factory setting: [15]
[V DETAIL LEVEL] Sets the correction level of the vertical detail.
[00] - [63]
f
Factory setting: [15]
[PEAK FREQUENCY] Sets the peak frequency of the horizontal detail.
[00] - [31]
f
Factory setting: [10]
[V DETAIL FREQUENCY] Sets the vertical detail frequency.
[00] - [31]
f
Factory setting: [10]
[CRISP] Sets the detail signal noise elimination level.
[00] - [63]
f
Factory setting: [10]
[DETAIL GAIN( + )] Sets the detail level in the + (upward) direction.
[ − 31] - [ + 31]
f
Factory setting: [0]
[DETAIL GAIN( − )] Sets the detail level in the − (downward) direction.
[
−
31] - [
+
31]
f
Factory setting: [0]
[DETAIL CLIP + ] Adjust the detail clip to reduce glare produced by an excess of details.
[00] - [63]
f
Factory setting: [0]
[DETAIL CLIP − ] Adjusts the length of the undershoot of the detail edge component.
[00] - [63]
f
Factory setting: [0]
[DETAIL SOURCE] Sets the RGB signal component ratio to create the detail.
[(G + R)/2], [(G + B)/2], [(2G + B + R)/4], [(3G + R)/4], [R], [G]
f
Factory setting: [(G + R)/2]
[KNEE APERTURE LEVEL] Adjusts the knee aperture level.
[00] - [39]
f
Factory setting: [00]
[LEVEL DEPENDENT SWITCH] Enables/disables the function to eliminate the detail in the dark areas.
[OFF], [ON]
f
Factory setting: [OFF]
[LEVEL DEPENDENT] Sets the level to eliminate the detail in the dark areas.
[00] - [15]
f
Factory setting: [8]
[SKIN TONE DETAIL SETTING]
Item Description of settings
[SKIN TONE DETAIL] Enables/disables the skin tone detail function.
[OFF], [ON]
f
Factory setting: [OFF]
[SKIN GET] — Selects whether to automatically obtain the color saturation and hue information from the cursor position.
[NO], [YES]
[MEMORY SELECT] Selects the skin tone table of the subject to apply the skin tone table to.
[A], [B], [C]
f
Factory setting: [A]
[CURSOR] Shows/hides the box cursor in the center of the screen.
[OFF], [ON]
f
Factory setting: [OFF]
[H POSITION] Adjusts the horizontal position of the cursor.
[0%] - [100.00%] (0.25% steps)
f
Factory setting: [50.00%]
[V POSITION] Adjusts the vertical position of the cursor.
[0%] - [100.00%] (0.25% steps)
f
Factory setting: [50.00%]
[ZEBRA] — Enables/disables the zebra display.
[OFF], [ON]
f
Factory setting: [OFF]