Panasonic AK-UB300G, Руководство по эксплуатации

Страница: 38 / 110

– 38 –
Chapter 3 Operation — Convenient shooting functions
Using the flash band compensation function
The flash band compensation function is activated when there are large changes in brightness at the bottom of the screen regardless of whether there is
flash strobe light.
The flash band compensation function may be activated depending on the shooting environment such as where a bright window has zoomed in and
then out. We recommend use of this function in shooting environments where flash strobe lighting is anticipated.
Sufficient flash band compensation function effect may not be obtained in some shooting environments if flash is generated.
Flash band compensation function operation conditions
f
The flash band compensation function can be used when all of the following conditions are met.
- One of 59.94i, 59.94P, 50i, or 50P mode (only operates in the HD mode, does not operate in the UHD mode/UHD CROP mode)
- Scan reverse and digital zoom functions are not operating
- When set to [MAIN MENU] → [SWITCH MODE] → [SHUTTER SPEED] → [SHUTTER SW] → [OFF]
f
Even if the flash band compensation function is enabled, the flash band compensation function is forcibly disabled when the camera is changed to a
mode where the flash band compensation function cannot be used.
To use it again, return to the mode that the flash band compensation function can be used, and set to [MAIN MENU]
→ [SWITCH MODE] → [FBC
SETTING] → [FBC] → [ON].
f
Even if the flash band compensation function is enabled, the flash band compensation function is temporarily disabled when set to [MAIN MENU] →
[SWITCH MODE] → [SHUTTER SPEED] → [SHUTTER SW] → [ON].
The flash band compensation function is enabled again when set to [MAIN MENU] → [SWITCH MODE] → [SHUTTER SPEED] → [SHUTTER SW] →
[OFF] again.
UHD crop function
HD crop image from the UHD signal can be output to the <HD SDI OUT 1> terminal, <UHD/HD SDI OUT 1>/<UHD/HD SDI OUT 2> terminal when
[MAIN MENU]
→ [SYSTEM MODE] → [FORMAT] → [1080/59.94p CROP]/[1080/50p CROP] is selected. (Fig. 2)
At this time, the HD signal with UHD aspect ratio is output to the image from the <HD SDI OUT 2> terminal, and crop frame is displayed. (Fig. 1)
To output the HD crop image to the image from the <HD SDI OUT 2> terminal, select [MAIN MENU]
→ [IN/OUT SELECT] → [UHD CROP] → [HD-SDI2
OUT SEL] → [CROP].
Crop frame
Fig. 1 Fig. 2
f
The cropped image to be output can be selected from three types in [MAIN MENU] → [IN/OUT SELECT] → [UHD CROP] → [CROP OUT SEL].
The selected crop frame is displayed bright, and it is confirmed by pressing the jog dial.
[YL]: Image of yellow crop frame is output.
[G]:
Image of green crop frame is output.
[MG]:
Image of magenta crop frame is output.
f
Displaying of the crop frame can be selected in [MAIN MENU] → [IN/OUT SELECT] → [UHD CROP] → [CROP MARKER SEL].
[YL]: Only the yellow crop frame is displayed.
[G]: Only the green crop frame is displayed.
[MG]: Only the magenta crop frame is displayed.
[YL + G]: The yellow and green crop frames are displayed.
[YL + MG]: The yellow and magenta crop frames are displayed.
[G + MG]: The green and magenta crop frames are displayed.
[YL + G + MG]: The yellow, green, and magenta crop frames are displayed.