Panasonic AK-UB300G, Руководство по эксплуатации

Страница: 37 / 110

– 37 –
Chapter 3 Operation — Convenient shooting functions
@ @ NOTE
t
This will only operate in the HD mode. This will not operate in the UHD mode/UHD CROP mode.
Color bar
The color bar convenient to adjust the image quality of a TV or an external monitor can be displayed.
Three types of color bar type ([FULL]/[SMPTE]/[ARIB]) can be selected in [MAIN MENU]
→ [SWITCH MODE] → [BAR SETTING] → [BAR SELECT].
Focus assist function
The focus assist function enables you to focus the target easily.
Expanded display, focus assist color display (display where the contour of the image is bordered with the selected color), and focus bar can be
displayed in the output from the <HD SDI OUT 2> terminal.
Focus assist color display
Set to [MAIN MENU] → [DISPLAY SETUP] → [MARKER] → [FOCUS ASSIST] → [IN RED SW] → [ON] in advance.
Select either of [RED]/[GREEN] in [MAIN MENU] → [DISPLAY SETUP] → [MARKER] → [FOCUS ASSIST] → [IN RED COLOR].
The contour of the image is bordered with the selected color when set to [MAIN MENU] → [DISPLAY SETUP] → [MARKER] → [FOCUS ASSIST] → [IN
RED SW] → [ON]. At this time, the screen frame will be in the selected color.
Adjust the focus so that the contour of the subject to focus will turn into the selected color.
@ @ NOTE
t
Displayed only in the output from the <HD SDI OUT 2> terminal.
Focus bar display
The focus bar is displayed when set to [MAIN MENU] → [DISPLAY SETUP] → [MARKER] → [FOCUS ASSIST] → [BAR SW] → [ON].
The degree of focus is indicated by the length of the bar.
Not in focus The bar extends to the right when the viewfinder is
in-focus.
f
White bar: Focus bar display
f
Green line: Peak display
Flash band compensation (FBC) function
The camera is equipped with a function for compensating and reducing band-like interference (called “flash band”) that occurs due to the MOS pickup
device when shooting in environments where flash strobe light such as a still camera is present.
Change over time
Shot image
(FBC OFF)
Flash firing
Flash band
The flash band compensation function is enabled when set to [MAIN MENU] → [SWITCH MODE] → [FBC SETTING] → [FBC] → [ON]. The flash strobe
light such as a still camera is detected and can be compensated.
When the flash band compensation function is enabled, [FBC] is displayed on the status screen.
Not displayed when set to [OFF].
FBC DRS H.SENS.
@ @ NOTE
t
When the flash strobe lights, the following phenomena may occur. These are due to the flash band compensation function and are not malfunctions.
- Moving subjects look as if they have been stopped for a moment.
-
The resolution drops when the flash strobe lights.
- Horizontal lines appear in the video when the flash strobe lights.
- Flash bands appear only in images shot at the time the flash strobe lights.