manualshive.com logo in svg

Panasonic AK-UB300G, Руководство по эксплуатации

Поделиться
Скачать
Panasonic AK-UB300G Скачать руководство пользователя страница 26

– 26 –

Chapter 3 Operation — Operation procedure

Operation procedure

1 

Turn on the power of each device.

2 

Illuminate the subject appropriately.

3 

Adjust the lens flange back and adjust the iris and focus.

Always perform the lens flange back adjustment when using the camera for the first time or when the lens is changed.

4 

Adjust the white balance.

This is necessary when the camera is used for the first time or when it was not used for a long time.

This is necessary when the illumination condition or the brightness has changed.
Once the white balance is adjusted, it is not necessary to adjust again under the same condition.

5 

Adjust the black balance.

This is necessary when the camera is used for the first time or when it was not used for a long time.

This is necessary when the ambient temperature has drastically changed or when the season has changed.
Once the black balance is adjusted, it is not necessary to adjust again under the same condition.

6 

Shoot.

Turn off the power of each connected device when the shooting is completed.

Содержание AK-UB300G















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды