background image

– 10 –

Chapter 1 Overview — Notes

Notes

Required environment for computer

Use a host computer that satisfies the following requirements.

 

r

CPU

Intel

®

 Core

TM

 2 DUO 2.4 GHz or above recommended

 

r

Memory 

 

f

Windows
1 GB or above
However, 2 GB or larger for Microsoft

®

 Windows

®

 10/Microsoft

®

 Windows

®

 8.1/Microsoft

®

 Windows

®

 8/Microsoft

®

 Windows

®

 7 64-bit

 

f

Mac
2 GB or above

 

r

Network function

10BASE-T or 100BASE-TX
1 port

 

r

Image display function

Resolution: 1024

×

768 pixels or above

Color: True Color 24-bit or above

 

r

Supported OS and web browsers

 

f

Windows
Microsoft

®

 Windows

®

 10 Professional 64-bit/32-bit*

1

Microsoft

®

 Windows

®

 8.1 Professional 64-bit/32-bit*

1

Windows

®

 Internet Explorer

®

 11.0*

1

*

3

Microsoft

®

 Windows

®

 8 Professional 64-bit/32-bit*

1

Windows

®

 Internet Explorer

®

 10.0*

1

*

3

Microsoft

®

 Windows

®

 7 Professional SP1 64-bit/32-bit*

2

Windows

®

 Internet Explorer

®

 11.0/10.0/9.0/8.0*

3

*1  Use Internet Explorer for desktop. (Internet Explorer for Windows UI is not supported.)
*2  The Windows

®

 XP compatibility mode cannot be used.

*3  Internet Explorer

®

 64-bit cannot be used.

 

f

Mac
OS X 10.11 Safari 9.0
OS X 10.10 Safari 8.0.4
OS X 10.9 Safari 7.0.2
OS X 10.8 Safari 6.1.2

Disclaimer

In any case, Panasonic will not liable for any of the following:

 

f

Incidental, special, or consequential damage or harm caused directly or indirectly in regard to the camera

 

f

Trouble or malfunctions caused by the misuse or careless use of a user

 

f

Disassembly, repair, or modification of the camera performed by a user

 

f

Inconvenience, damage, or harm arising from the inability to display images as a result of any reason or cause including failure or malfunction of the 
camera

 

f

Malfunctions arising from a system that has been combined with a third party device or any inconvenience, damage, or harm caused as a result 
thereof

 

f

Inconvenience, damage, or harm caused by such as improper installation or any reason other than a defect of the camera

 

f

Any loss of stored information due to any reason

 

f

Any damage or claim regarding loss or leakage of image data or setting data saved in the camera, memory card, or computer

Notes regarding network

This camera is provided with functions which are used upon connecting to a network.
When the camera is used while connected to a network, there are the following potential risks.

 

f

Leakage or disclosure of information via the camera

 

f

Manipulation of the camera by a malicious third party

 

f

Interference or interruption of the camera caused by a malicious third party

To prevent such risks, users are responsible for implementing sufficient network security measures inclusive of the following.

 

f

Use the camera over a network where safety is ensured with the installation of a firewall, etc.

 

f

When the camera is used in a system to which a computer is connected, be sure to perform regular checks or detections for computer viruses and 
malware.

In addition, be sure to observe the following precaution.

 

f

Do not install the camera or cables in a place where they may easily be damaged.

Содержание AK-UB300G















































































































Отзывы: