49
Playback
CMPNT/SDI SEL :
This is used to set the format of the D connector output and HD/SD-SDI output signals.
(When SYSTEM
FREQ is set to 59.94
Hz)
AUTO
The signals corresponding to the setting for SYS FORMAT item (Page 76) on the
RECORDING SETUP screen are output.
1080i
720P signals are cross-converted to 1080i signals, and output.
480i
480i format signals are output; 720P/1080i signals are down-converted to 480i
and output.
(When SYSTEM
FREQ is set to 50 Hz)
AUTO
The signals corresponding to the setting for SYS FORMAT item (Page 76) on the
RECORDING SETUP screen are output.
1080i
720P signals are cross-converted to 1080i signals, and output.
576i
576i format signals are output; 720P/1080i signals are down-converted to 576i
and output.
SDI OUT
ON
SDI signals are output.
OFF
SDI signals are not output.
SDI METADATA
ON
The meta-data is superimposed onto the HD-SDI signals.
OFF
The meta-data is not superimposed onto the HD-SDI signals.
SDI EDH
ON
EDH is superimposed onto the SD-SDI signals.
OFF
EDH is not superimposed onto the SD-SDI signals.
SETUP
This is used to adjust the setup level of the video output signals during playback in the
480i format.
• This item is not displayed on the menu when SYSTEM FREQ is set to 50 Hz.
0%
The setup level of the video output signals is set to 0 %.
7.5%A The setup level of the video output signals is set to 7.5 %.
The setup level for component output (D connector), SDI output and 1394 input recording
is set to 0 %.
The HD/SD-SDI output signals comply with the following standards.
HD : SMPTE 292M, 296M, 299M
SD : SMPTE259M-C/272M-A, ITU-R BT. 656-4
The underlined settings are the factory mode settings.
