Panasonic AGHPG10P - MEMORY CARD PORTABLE RECORDER Скачать руководство пользователя

Страница: 45 / 98

Playback

Variable-speed searches

You can change the playback speed and search
for specific locations.

Press during playback.

1X is displayed.

Press

, and change the playback

speed.

X /X

or X /X

is displayed.

• Each time the button is pressed, the playback

speed changes by one setting in the following
sequence: 1/5x, 1x, 2x, 4x, 12x and 24x. No
sound will be played back at the 12x or 24x
speed.

• Use to increase the speed, and to

decrease it.

To return to normal playback, press .

Clip forward/reverse

Press during playback to establish the
pause mode.

Press or .

CLIP or CLIP is displayed.

Rapid forward/rapid reverse playback

During playback, press or .

The clip is played back rapidly at 4x normal
speed in the forward or reverse direction. When
the button is held down, the speed increases
(to 32x normal speed).

is displayed.

To return to normal playback, press .

Frame feed playback

Press during playback to establish the
pause mode.

Press

• The clips are fed frame by frame in the

forward direction using and in the reverse
direction using .

or is displayed.

• When the button is held down, frame feeding

is continued.

To return to normal playback, press .

Repeat playback

The selected clip is played repeatedly.

Press [THUMBNAIL/MODE] to display the

thumbnail display off screen.

Press [MENU/MODE CHK].

Using , and , select “PLAYBACK

FUNCTIONS” – “REPEAT PLAY” – “ON”,
and press .

Press [MENU/MODE CHK] twice.

The repeat playback icon is displayed on the
thumbnail display off screen.

106 min

HD720P

Press [THUMBNAIL/MODE] to display the

thumbnail display screen.

Using or , move the yellow frame

(cursor) to the repeat playback clip, and
press .

Press [MENU/MODE CHK].

Using , and , select “THUMBNAIL”

– “SELECTED CLIPS”, and press .

Press .

The selected clip is now played back
repeatedly.

• Playback is repeated until is pressed.
• If a clip has not been selected, all the currently

displayed clips which can be played back will be
played back repeatedly.

• To turn off the repeat playback setting, select

“OFF” in step 3.

• When rapid forward or rapid reverse playback

is performed during repeat playback, playback
stops after the first playable clip or last playable
clip is played back.

Repeat
playback icon

Содержание AGHPG10P - MEMORY CARD PORTABLE RECORDER



































































































Результаты поиска

Содержание AGHPG10P - MEMORY CARD PORTABLE RECORDER

Отзывы:

Похожие инструкции для AGHPG10P - MEMORY CARD PORTABLE RECORDER

Бренды по названию

Популярные бренды

Panasonic AGHPG10P - MEMORY CARD PORTABLE RECORDER, Руководство по эксплуатации

Результаты поиска

Содержание AGHPG10P - MEMORY CARD PORTABLE RECORDER

Отзывы:

Похожие инструкции для AGHPG10P - MEMORY CARD PORTABLE RECORDER

Бренды по названию

Популярные бренды