background image

12

Be absolutely sure to check the calendar and time zone, and set them if necessary.

•  The calendar and time zone affect the management and playback sequence of the data content which 

has been recorded. Before recording, set and check the calendar and time zone. (Page 23)

No compensation can be made for video recordings.

•  The manufacturer will not provide any compensation in the event that images fail to be recorded due to 

trouble while the unit and P2 card are being used.

Concerning copyrights

•  You may use the images and sound which you have recorded for your own personal enjoyment only; 

under copyright laws, you may not use them for any other purpose without the permission of the 
copyright holders.

Precautions when connecting the unit using a DV(IEEE1394) cable

 Windows :

  Before connecting the cable, turn off the unit’s power, and check the shape and insertion direction of the 

cable connector.

•  Apple Macintosh :

  Before connecting the cable, turn on the power of the Apple computer, and then check the shape and 

insertion direction of the cable connector. (Page 64)

Media which can be used with this unit

You may use the following media. For further details, refer to the pages on the media concerned.
•  P2 cards (Page 24)
•  SD/SDHC memory cards (Page 28)

Screw holes

M5 (5 mm diameter) screws with a length of 10 mm can be used for the four screw holes on the side 
panels of the unit.
When using the screws, do not tighten them too much.  The unit may be damaged if screws other than 10 
mm long M5 (5 mm diameter) screws are used.

          

 

 

 

 

The other side panel also has two screw holes.

Refer to page 90 for other operating precautions.

Note concerning illustrations in these instructions

•  Illustrations (portable recorder, menu screens, etc.) in these operating instructions differ slightly from the 

actual portable recorder.

References

•  References are shown as (Page 12).

About this manual

Screw holes

Before use

Содержание AGHPG10P - MEMORY CARD PORTABLE RECORDER



































































































Отзывы: