Panasonic AGHPG10P - MEMORY CARD PORTABLE RECORDER Скачать руководство пользователя | Manualshive

Страница: 3 / 98

background image

3

FCC NOTICE (USA)

Declaration of Conformity

Model Number:

AG-HPG10P

Trade Name:

PANASONIC

Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ

07094

Support contact:

Panasonic Broadcast & Television Systems Company 1-800-524-1448

This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
To assure continued compliance, follow the attached installation instructions and do not make any
unauthorized modifications.

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.
The user may find the booklet “Something About Interference”
available from FCC local regional offices helpful.

FCC Warning:

To assure continued FCC emission limit compliance, the user must use only shielded interface
cables when connecting to host computer or peripheral devices. Also, any unauthorized changes or
modifications to this equipment could void the user’s authority to operate this device.

NOTIFICATION (Canada)

This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numéique de la classe B est conforme à la norme NMB-003 du Canada.

indicates safety information.

For USA-California Only

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special
handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.

For USA and Canada

A lithium ion/polymer battery that is recyclable powers the product you have purchased.
Please call 1-800-8-BATTERY for information on how to recycle this battery.

«
1
2
3
4
5
...
»

Содержание AGHPG10P - MEMORY CARD PORTABLE RECORDER



































































































Отзывы:

Нет отзывов

Похожие инструкции для AGHPG10P - MEMORY CARD PORTABLE RECORDER

Бренд: Gardena Страницы: 4

Бренд: NCR Страницы: 6

New Jersey MP68

Бренд: Blaupunkt Страницы: 74

Бренд: Jula Страницы: 19

Бренд: Datapath Страницы: 2

Бренд: C Prox Страницы: 2

Bulk Pro SP-1575

Бренд: SnowEx Страницы: 24

Бренд: Linea Страницы: 17

Бренд: Rice Lake Страницы: 5

Бренд: Dcm Страницы: 16

Бренд: Kvaser Страницы: 17

Linea-PRO 4 MSR

Бренд: Infinite Peripherals Страницы: 24

Бренд: Moultrie Страницы: 2

Бренд: MS Schippers Страницы: 16

FREIBURG RCM 148

Бренд: Blaupunkt Страницы: 24

Бренд: DKS Страницы: 2

Бренд: Sony Страницы: 4

Бренд: Sony Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды