Palmgren 9683408, Руководство по эксплуатации и список запасных частей

Страница: 19 / 40

STORE THE TABLE SAW ACCESSORIES
Refer to Figure 25
The table saw has four convenient storage areas (one on each side
and rear of the saw cabinet and right side of underneath the work
table) specifically designed for the saw’s accessories: blade (1),
blade wrenches (2), push stick (3), rip fence (4), blade guard (5),
plug cable (6), mitre gauge (7), anti-kickback pawls (8), sub rip
fence (9) and dado table insert (10). These accessories must be
securely stored prior to closing the stand and moving the saw.
FOLD THE STAND AND MOVE THE SAW
Refer to Figure 26a-26c
• Remove any workpieces from the tool.
• Remove the blade guard and anti-kickback pawls assembly.
• Remove and securely store any tools or accessories such as rip
fence, mitre gauge, push stick, etc.
• Slide the right and rear extension tables inwards until it rests
against the work table, and secure it in place.
• Lower the saw blade.
TO FOLD THE STAND
Refer to Figure 26a-26b
• Loosen the two stand leg-locking knobs (1) (each one on front
and rear of the stand) provided at right side of the stand. Fold the
right leg set (2) up to the saw base until it snaps into place. Lock
the right leg set by tightening the stand leg-locking knobs.
• Rest the right side of the stand onto the floor with the help of
roller wheels (3).
• Loosen the two stand leg-locking knobs (4) (one each on the front
and rear of stand) provided at the left side of the stand. Now tilt
the stand on its right side slightly and fold the left leg set (5) until
it snaps into place. Lock the left leg set (5) by tightening the stand
leg-locking knobs.
TO MOVE THE STAND
Refer to Figure 26c
Grasping the handle (6) firmly, push the table saw to the desired
location then either open the stand for saw operation or store the
table saw in a dry environment.
TO UNFOLD THE STAND
Refer to Figure 27a-27c
• Loosen the two stand leg-locking knobs (1) provided at left side of
the stand. Lift the right side of the table saw up slightly off the
floor and then unfold the left leg set (2) away from the saw base
until it snaps into place.
• Rest the left side of the stand onto the floor. Loosen the two stand
leg-locking knobs (3) on the right side of the stand, and tilt the
table saw with stand on its left side. Unfold the right leg set (4)
away from the saw base until it snaps into place.
19
PALMGREN Operating Manual & Parts List 9683408
Figure 16
Figure 26a
Figure 26b
Figure 26c
1
9
8
10
7
3
5
4
6
2
2
1
4
3
5
6