Palmgren 9683408, Руководство по эксплуатации и список запасных частей

Страница: 2 / 40

The PALMGREN 10” Table Saw, model number 9683408 offers
precise cutting performance for wood up to 3-9⁄64” thick. The 10”
table saw is recommended for use with a 10” blade.
You can use this tool for the purposes listed below:
• Straight-line cutting operations such as cross cutting, ripping,
mitring 0–45° mitre angle, bevel crosscutting 0–45° blade bevel
and 90° mitre angle and 0–45° blade bevel and 0–45° mitre angle.
• Dado cuts with optional accessories.
• Cabinet making and woodworking.
DESCRIPTION
UNPACKING
2
PALMGREN Operating Manual & Parts List 9683408
Figure 1 - Unpacking
A
B
C
D
E
G
J
K
L
N
O
T
U
V
W
X
AA
CC
Z
Y
F
DD
BB
P
Q
R
M
S
H
I
Refer to Figure 1.
Do not use this product if any parts of the package contents are
already assembled to your product when you unpack it. Package
contents are not assembled to the product by the manufacturer
and require customer installation. Use of a product that may have
been improperly assembled could result in serious personal injury.
• Carefully remove the table saw from the carton and remove the
protective polyfoam around the motor.
• Inspect the tool carefully to make sure no breakage or damage
occurred during shipping.
• Do not discard the packing material until you have carefully
inspected and satisfactorily operated the tool.
• The saw is factory set for accurate cutting. After assembling it,
check for accuracy. If shipping has influenced the settings, refer to
specific procedures explained in this manual.
• If any parts are damaged or missing, please call 1-800-827-3398
for assistance.
CAUTION:
If any parts are damaged or missing, do not operate
this tool until the parts are replaced. Use of this product with
damaged or missing parts could result in serious personal injury.
• Do not attempt to modify this tool or create accessories not
recommended for use with this tool. Any such alteration or
modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.
• Do not connect to power supply until assembly is complete.
Failure to comply could result in accidental starting and possible
serious personal injury.
• Risk of injury! Always pull out the mains plug (disconnect the
product from its power supply) before commencing work on the
product.
For table saw
For stand
A Table saw assembly (1)
B Blade guard assembly (1)
C Anti-kickback pawls assembly (1)
D Rip fence (1)
E Sub fence (1)
F Mitre gauge (1)
G Parallel profile (1)
H Locking knobs (2)
I Dado table insert (1)
J Right extension table (1)
K Rear out-feed support (1)
L Extension poles and locating seats (2)
M Cross screws M4 x 10 (4)
N Locking knobs (4)
O Blade guard storage (1)
P Anti-kickback pawls storage (1)