Palmgren 9683408, Руководство по эксплуатации и список запасных частей

Страница: 20 / 40

OPERATION
Refer to Figures 28-34, pages 20-26.
WARNING! To reduce the risk of serious personal injury, turn unit
off and unplug the tool before making any adjustments or
removing/installing attachments or accessories. An accidental
start-up can cause injury.
WARNING! Before using the saw, verify the following each and
every time:
• ALWAYS wear proper eye, hearing and respiratory equipment.
• Blade is securely tightened.
• Lock the left leg set (2) and right leg set (4) in unfolded position
by tightening the stand leg-locking knobs (1 and 3).
• Bevel locking lever is locked.
• If ripping, ensure that rip fence locking handle is locked and that
the fence is parallel to the blade.
• If crosscutting, mitre gauge lock knob is securely tightened.
• The blade guard assembly is properly attached and the
anti-kickback assembly is functioning.
• Have push sticks available and accessible.
WARNING! To reduce the risk of serious personal injury, have push
stick ready to use before starting cut.
WARNING! Feed the workpiece into the saw blade only against the
direction of rotation. Feeding the workpiece in the same direction
that the saw blade is rotating above the table may result in the
workpiece, and your hand, being pulled into the saw blade.
WARNING! When the tool is in maintenance or servicing or not in
use, ALWAYS turn off saw and unplug the saw. The saw will
automatically shut down when in a power failure; restart the
machine by pressing the green "I" button on the on/off switch.
WARNING!
ALWAYS make sure your workpiece is not in contact with the blade
before operating the switch to start the saw. Blade contact could
result in kickback or thrown workpiece.
WARNING!
To reduce the risk of accidental starting, ALWAYS make sure the
switch is in the OFF position before plugging saw into the power
source.
WARNING!
DO NOT use blades rated less than the speed of this
tool. Failure to heed this warning could result in serious personal
injury.
WARNING! The operation of any power tool can result in foreign
objects being thrown into the eyes, which can result in severe eye
damage. Always wear safety goggles or standard safety glasses
with side shields complying with United States ANSI Z87.1 before
commencing power tool operation.
WARNING! Never operate the saw with the blade guard removed
except for dado and other non-through cuts. Reinstall the blade
guard immediately after finishing any non-through cut operations
which require removal of the blade guard. Failure to heed this
instruction could result in serious personal injury.
APPLICATIONS
You can use this tool for the purposes listed below:
• Straight-line cutting operations, such as crosscutting, ripping,
mitring, and compound cutting.
• Dado with optional accessories.
CAUTION!
This table saw is designed to cut wood and wood
composition products only. Never cut metals, cement board, or
masonry.
OPERATING COMPONENTS
• The upper portion of the blade projects up through the table and
is surrounded by an insert called the table insert. The height of
the blade is set with a height-adjusting knob on the height/bevel
adjusting handwheel. Detailed instructions are provided in this
manual for the basic cut: cross cuts, mitre cuts, bevel cuts, and
compound cuts.
• The rip fence is used to position workpiece for lengthwise cuts.
• It’s very important to use the riving knife, anti-kickback pawls, and
blade guard for all through-cut sawing operations.
CAUSES OF KICKBACK
Kickback can occur when the blade stalls or binds, causing the
workpiece to be kicked back toward the operator with great force
and speed. If your hands are near the saw blade, they may be
jerked loose from the workpiece and come into contact with the
blade. Obviously, kickback can cause serious injury, and it is well
worth using precautions to avoid the risks. Kickback can be caused
20
PALMGREN Operating Manual & Parts List 9683408
2
1
4
3
1
2
4
3
Figure 27a
Figure 27b
Figure 27c