Palfinger PK 23002, Руководство оператора

Страница: 9 / 94

Overview of dangers 1.1-1
1.1. Overview of dangers
1.1-1 Rules for the avoidance of dangers
1. General safety instructions
Operation only by trained personnel.
Safety devices not to be tampered with.
Prescribed safe distances to be maintained.
Safe distances from electric power lines to be maintained.
Be alert to faults during crane operation.
2. Prior to crane operation
Pay attention to effluent hydraulic oil.
Make a visual inspection.
Check the safety devices before start-up
3. On start-up
Use the adequate hydraulic fluid according to the temperatures.
The slope of the vehicle must not exceed 3° in any direction.
Outriggers must be fully extended.
When extending outriggers and stabilizer cylinder observe the safety distances.
If necessary, enlarge the support surface according to the condition of the ground.
The vehicle must not be raised using the support.
Lock manually extendable outriggers properly.
Prevent the support from sinking into the ground.
Adjust the support when loading and unloading.
Before unfolding the crane mechanical extensions have be secured properly.
Cranes with floor control stand unfold from side A (Control valve side).
4. During crane operation
Ensure the crane is used according to the specifications.
Keep an eye on the working area.
Do not stay in the danger area of the crane.
Safeguard the working area.
Select the adequate control stand.
Pick up and secure loads in the due and proper manner.
Use of load lifting gear and ancillary equipment supplied by PALFINGER.
Secure attachment of ancillary equipment.
Adherence to the max. lifting capacity of the crane, ancillary equipment and load lifting gear.
No load moment increase when lowering the load.
5. After crane operation
Secure crane in transport position.
Observe safety distances when retracting the outriggers and stabilizer cylinder.
Lock the manually retractable outriggers in the retracted position.
Check the outrigger locking device before every trip.
Switch off hydro pump.
Observe maximum head room on bridges and tunnels.
6. Maintenance and lubrication
Carry out maintenance work only when the machine is inoperative.
Keep steps, standing areas and handles clean.