Palfinger PK 23002, Руководство оператора

Страница: 72 / 94

5.1-2 Ending crane operation
•
Retract the hydraulic extendable arms.
•
Slew the crane across the direction of
travel, observe the marking (retraction
arrows) on the crane pillar and crane
base.
•
Fold in the extendable arm until the load
arm rests in the support for it on the
crane base.
If the load arm is not folded down onto the crane base but onto the loading surface it must be secured
in particular to prevent it moving out sideways. Be aware that depending on the position of the boom
the total height of the vehicle can increase and maximum head room heights must be observed
particularly carefully.
If the load arm folded down onto the loading surface is not secured
adequately against moving out sideways or maximum headroom
heights are not observed serious accidents can occur. There is a
danger of injury and death for you and other road-users.
5.1-2 Retracting the support
Retract the support cylinders individually so that you always have the danger area in view. Lift any
swivel supports and bolt and secure them properly.
When retracting the outriggers keep the minimum distances listed under 1.3-1.
When retracting the outrigger and support cylinder on the other side
you must always have them in your field of vision, otherwise you must
change the operating side.
1
2
2
1