Palfinger PK 23002, Руководство оператора

Страница: 71 / 94

Ending crane operation 5.1-1
5.1. Ending crane operation
5.1-1 Putting crane in transport position
In your activity observe all the safety instructions in Chapter 1
Cranes with floor control stand: cranes with floor control stand must be put into transport position from
A control stand.
B control stand
(Opposite control side)
A control stand
(Main control side)
The retraction of a crane with floor control stand must be carried out
from the A control stand. Otherwise there is danger of injury from the
descending crane arm.
Cranes with RC operation: On cranes with radio remote control make sure that you are not in the area
of the slewing or descending boom. Select a standing place outside of the crane danger area (see also
Chapter4).
Raised control stand: cranes with raised control stand are additionally equipped with floor control
stand and may only be put in transport position from A control stand.
Retracting the crane:
•
Push the extensions in and secure them as described in Chapter 4.
If extensions are not properly retracted and secured they can slide out
of the hydraulic extendable arms and then represent a high risk of
accident for you and others.
When retracting the crane please ensure to have all crane movements within your field of vision.
•
Extend the extendable arms approx.
50cm.
•
Fold in the hinged arm completely.