Palfinger 200010121 Скачать руководство пользователя

Страница: 332 / 435



Pull the handle with both hands to fold out the platform to
the rear.



Turn the rotary switches

(28)

and

(29)

simultaneously

downward and hold them in this position until the platform
has reached the horizontal position.



Fold the folding part of the platform with both hands to the
operating position.

Lowering the Platform



Turn the rotary switches

(27)

and

(29)

simultaneously

downward and hold them in this position until the platform
has made contact with the ground.

After the platform has touched the ground it tilts and adjusts
to the ground.

Lifting the Platform



Turn the rotary switches

(27)

and

(29)

simultaneously up-

ward and hold them in this position until the platform has
reached the loading position.

Folding In the Platform



Make sure that the platform is in horizontal position touch-
ing the ground.



Protect your hands with gloves.



Unfold the folding part of the platform with both hands from
the operating position onto the stationary part of the plat-
form.



Turn the rotary switches

(28)

and

(29)

simultaneously up-

ward and hold them in this position until the platform has
reached the vertical position.



Protect your hands with gloves.



Use both hands to push the platform against the guide pul-
ley.



Turn the rotary switches

(27)

and

(29)

simultaneously up-

ward and hold them in this position until the platform has
reached the transport position.



Close the platform interlock (if present).

Содержание 200010121




















































































































































































































































































































































































































































Результаты поиска

Содержание 200010121

Отзывы:

Похожие инструкции для 200010121

Бренды по названию

Популярные бренды

Palfinger 200010121, Руководство пользователя

Результаты поиска

Содержание 200010121

Отзывы:

Похожие инструкции для 200010121

Бренды по названию

Популярные бренды