Palfinger 200010121 Скачать руководство пользователя

Страница: 190 / 435

123

Maintenance Before Starting

Checking the Safety and Warning Devices

The safety devices of the tail lifts comply with the respective
current version of the valid regulations.



Before starting to drive, check whether all safety and warn-
ing devices are operational.



Renew any damaged and non-operational safety and warn-
ing devices.

Depending on the model, the safety and warning devices com-
prise:

• non-slip platform surface

• roll-off protection on the platform (optional)

• holding grip for the accompanying operator (not in scope of

delivery of the tail lift)

• warning flashers on the platform

• warning flags behind the platform

• platform interlock at the platform (optional)

• two-feet control for “lift” and “lower” on the platform

• key control at lateral operating element for trailers or semi-

trailers

• control box with ON/OFF switch in lockable driver's cab

• optical signal at control box in driver's cab for tail lift “ON”

and/or platform open

• stop valves on lift and tilt cylinders to prevent line break (ex-

cept model E)

• flow valves for limiting the lowering and opening speed (ex-

cept model E)

All Models

Содержание 200010121




















































































































































































































































































































































































































































Результаты поиска

Содержание 200010121

Отзывы:

Похожие инструкции для 200010121

Бренды по названию

Популярные бренды

Palfinger 200010121, Руководство пользователя

Результаты поиска

Содержание 200010121

Отзывы:

Похожие инструкции для 200010121

Бренды по названию

Популярные бренды