Palfinger 200010121 Скачать руководство пользователя

Страница: 334 / 435



Turn the rotary switch

(28)

downward and hold it in this po-

sition until the platform has reached the horizontal position.



Fold the folding part of the platform with both hands to the
operating position.

Lifting the Platform



Turn the rotary switch

(27)

upward and hold it in this posi-

tion until the platform has reached the loading position.

Lowering the Platform



Turn the rotary switch

(27)

upward and hold it in this posi-

tion until the platform is adjusted flush to the ground.

After the platform has touched the ground it tilts and adjusts
to the ground.

Folding In the Platform



Make sure that the platform is in horizontal position touch-
ing the ground.



Protect your hands with gloves.



Unfold the folding part of the platform with both hands from
the operating position onto the stationary part of the plat-
form.



Turn the rotary switch

(28)

upward and hold it in this posi-

tion until the platform has reached the vertical position.

The platform tilts from the horizontal to the vertical position.



Protect your hands with gloves.



Use both hands to push the platform against the guide pul-
ley.



Turn the rotary switch

(27)

upward and hold it in this posi-

tion until the platform has reached the transport position.



Close the platform interlock (if present).

Содержание 200010121




















































































































































































































































































































































































































































Результаты поиска

Содержание 200010121

Отзывы:

Похожие инструкции для 200010121

Бренды по названию

Популярные бренды

Palfinger 200010121, Руководство пользователя

Результаты поиска

Содержание 200010121

Отзывы:

Похожие инструкции для 200010121

Бренды по названию

Популярные бренды