Palfinger 200010121, Руководство пользователя

Страница: 31 / 435

28
Installing lifting mechanism
To fix the lifting mechanism with welded consoles to the vehicle
chassis, proceed as follows:
If it should become necessary to perform any welding work on the
stand tube, strictly observe the following safety instruction:

Mark the following holes on the console plate.
Observe the general installation diagram
and vehicle manufacturer's box body mounting
guidelines. Above all, note the number, position
and diameter of drill holes.

Drill the holes in the console plates.

Bolt the console plates to the vehicle chassis.
In the process, note the tightening torques
in the general installation diagram and in
the table on page 29.
NOTICE
Risk of damage to slide-in unit by welding
If you should fail to remove the slide-in unit before starting any welding work on the
stand tube, the slide-in unit may be damaged.

Prior to performing any welding work on the stand pipe, always remove the slide-
in unit.

Take appropriate measures to protect the slide-in unit from possible damage due
to welding.