Palfinger 200010121 Скачать руководство пользователя

Страница: 308 / 435



Turn the rotary switch

(30)

downward and hold it in this po-

sition until the platform is completely extended.



Turn the rotary switches

(27)

and

(29)

simultaneously

downward and hold them in this position until the folded
platform has made contact with the ground.



Protect your hands with gloves.



Pull the handle with both hands to unfold the folding part of
the platform.

Lowering the Platform



Turn the rotary switches

(27)

and

(29)

simultaneously

downward and hold them in this position until the platform
has made contact with the ground and is adjusted flush to
the ground.

After the platform has touched the ground it tilts and adjusts
to the ground.

Lifting the Platform



Turn the rotary switches

(27)

and

(29)

simultaneously up-

ward and hold them in this position until the platform has
reached the vehicle loading floor height.

The platform tilts to the horizontal or preset position before
it is lifted into the loading position.

Folding In and Retracting the Platform



Protect your hands with gloves.



Pull the handle with both hands to fold back the folding part
of the platform.



Close the platform interlock (if present).



Turn the rotary switches

(27)

and

(29)

simultaneously up-

ward and hold them in this position until the platform has
reached the retraction height.



Turn the rotary switch

(30)

upward and hold it in this posi-

tion until the platform is completely retracted. Observe that
the platform can be retracted without obstruction.



Turn the rotary switches

(27)

and

(29)

simultaneously up-

ward and hold them in this position until the platform has
reached the vibration safeguard.

Содержание 200010121




















































































































































































































































































































































































































































Результаты поиска

Содержание 200010121

Отзывы:

Похожие инструкции для 200010121

Бренды по названию

Популярные бренды

Palfinger 200010121, Руководство пользователя

Результаты поиска

Содержание 200010121

Отзывы:

Похожие инструкции для 200010121

Бренды по названию

Популярные бренды