Palfinger 200010121 Скачать руководство пользователя

Страница: 329 / 435

Folding In and Retracting the Platform



Protect your hands with gloves.



Grasp the platform edge with both hands to fold back the
platform.



Pull the folding part of the platform with both hands to fold it
back.



Close the platform interlock (if present).



Swivel the platform up to the roller at the support tube.



Turn the rotary switches

(27)

and

(29)

simultaneously up-

ward and hold them in this position until the platform has
reached the retraction height.



Turn the rotary switch

(30)

upward and hold it in this posi-

tion until the platform is completely retracted. Observe that
the platform can be retracted without obstruction.

Turn the rotary switches

(27)

and

(29)

simultaneously upward

and hold them in this position until the platform has reached the
vibration safeguard.

Содержание 200010121




















































































































































































































































































































































































































































Результаты поиска

Содержание 200010121

Отзывы:

Похожие инструкции для 200010121

Бренды по названию

Популярные бренды

Palfinger 200010121, Руководство пользователя

Результаты поиска

Содержание 200010121

Отзывы:

Похожие инструкции для 200010121

Бренды по названию

Популярные бренды