Palfinger 200010121 Скачать руководство пользователя

Страница: 364 / 435

113

Setting the Platform to its Horizontal Position



To adjust a steeper tilt of the platform, press both
pushbuttons

(27), (32)

and optionally

(29)

simultaneously

and hold them in this position until the platform has reached
the required tilt angle.



To adjust a flatter tilt of the platform, press both
pushbuttons

(28), (32)

and optionally

(29)

simultaneously

and hold them in this position until the platform has reached
the required tilt angle.

Extending and Folding Out the Platform



Loosen the platform interlock (if present).



Press the pushbuttons

(28)

and optionally

(29)

simultane-

ously and hold them in this position until the platform has
completely lowered.

The platform is lowered so that it can be extended without
obstruction.



Press the pushbutton

(30)

and hold it in this position until

the platform is completely extended.



Press the pushbuttons

(28)

and optionally

(29)

simultane-

ously and hold them in this position until the folded platform
has made contact with the ground.



Protect your hands with gloves.



Pull the handle with both hands to unfold the folding part of
the platform.

Folding In and Retracting the Platform



Protect your hands with gloves.



Pull the handle with both hands to fold back the folding part
of the platform.



Close the platform interlock (if present).



Press the pushbuttons

(27)

and optionally

(29)

simultane-

ously and hold them in this position until the platform has
reached the retraction height.



Press the pushbutton

(31)

and hold it in this position until

the platform is completely retracted. Make sure that the
platform can be retracted without obstruction.



Press the pushbuttons

(27)

and optionally

(29)

simultane-

ously and hold them in this position until the platform has
reached the vibration safeguard.

Содержание 200010121




















































































































































































































































































































































































































































Результаты поиска

Содержание 200010121

Отзывы:

Похожие инструкции для 200010121

Бренды по названию

Популярные бренды

Palfinger 200010121, Руководство пользователя

Результаты поиска

Содержание 200010121

Отзывы:

Похожие инструкции для 200010121

Бренды по названию

Популярные бренды