Palas Fidas 200 E, Руководство по эксплуатации

Страница: 4 / 106

Table of contents
4 5200-en_V2.0_06/20
5.2.12 Weather station calibration screen 53
5.2.13 Datalogger screen – measured data 54
5.2.14 Settings/calibration screen 56
5.2.15 Device status screen 58
5.2.16 Expert mode 61
5.2.17 Interface screen 62
5.3 Shut down the firmware and switch off the device. 63
5.3.1 Completely switching off device 63
5.3.2 Closing the firmware but not Windows 63
5.4 Removing/activating write protection 64
5.5 Files in the folder Fidas 65
5.5.1 Control file promo.ini 67
5.5.2 Adjusting measuring algorithm 71
6 Verifying and calibrating measuring system 72
6.1 Checking that aerosol sensor is unobstructed 75
6.2 Checking that controller shows no leakage 76
6.3 Checking device for leakage 78
6.4 Checking aerosol sensor zero point 80
6.5 Setting aerosol sensor offset 81
6.6 Calibrating flow rate 81
6.7 Setting average particle velocity 83
6.8 Calibrating particle size and particle velocity 84
6.9 Creating backup of control files 89
7 Maintenance 90
7.1 Maintenance intervals 91
7.2 Replacing filters for pumps 92
7.3 Cleaning aerosol sensor optical glasses 93
7.4 Replacing sealing rings 95
7.5 Servicing gravimetric filter 97
7.6 Replacing the fuse 98
7.7 Remote maintenance 98
8 Errors 99
9 Decommissioning 100
10 Packaging and transportation 101
10.1 Preparing the device 101
10.2 Packaging and transportation 101
11 Disposal 102
12 Spare parts 103
13 Declaration of conformity 104
14 Technical data 105